NymphNode™ Hardware Simulator & BLE Telemetry Testbed

🎯 Quick Target Presets:

🌊

Sink-to-Pressure & Retrieval Profile

STATUS: SURFACE IDLE

Simulate the NymphNode descent through the water column until reaching a target hydrostatic pressure (bar), drift across the riverbed seam, and ascend back during the line retrieval.

Target Hydrostatic Pressure 1.35 bar (3.44 m depth)

1.01 bar (Surface) 1.50 bar (5m) 2.00 bar (10m) 3.00 bar (20m)

Sink Rate (Descent) 0.45 m/s

Ascent (Retrieval) 0.65 m/s

Bottom Drift Hold Duration 6.0 seconds

🌊 Hydrostatic & Motion Controls

DA14531 / LPS27HHW / MC3630

Hydrostatic Sink Rate (Freshwater/Saline) 0.45 m/s

Sub-Surface Water Column Depth 1.10 m (220 half-cm)

Kinematic 3-Axis Vectors & Line Drag Warning |a| = 1.01g

AX (Lateral Drag) +0.05g

AY (In-Line Drift) +0.12g

AZ (Vertical Sink) -1.00g

💥 3-Axis Kinematic Impulses (X / Y / Z) Instantaneous Injections

X-Axis:

Y-Axis:

Z-Axis:

Kinetic Strike Trigger Impulse Threshold 3.80 g

Temp (°C) 19.2°C

Turbidity 82 NTU

Battery 95%

🎮 Angling Event Sequencer

Push BLE Notification Packets

📈 Sub-Surface & Motion Visualizers

5 Hz Stream

🔍 16-Byte BLE Live Packet Hex Inspector

CRC16: 0x0000

[0] Ver/Event [1] Seq [2-3] Depth (0.5cm) [4-5] Temp (0.01°C) [6-11] Accel X/Y/Z (mg) [12] Turbidity [13] Bat/Chg [14-15] CRC16-CCITT

📟 Packet Transmission Terminal

[SYS] NymphNode™ Hardware Simulator Ready.

[BLE] GATT Service 0000FFE0-0000-1000-8000-00805F9B34FB initialized.

[PRES] Sandshark telemetry preset loaded: 1.10m depth, 19.20°C, 3.80g trigger.

🧪

Optical Turbidity Over Time (NTU)

82 NTU

-60s (Clear Spring) -30s Now (Current NTU)

💾

Per-Instance Flight Data Recorder

⏺️ 0 Instances Logged

High-fidelity black box recorder capturing every single 200ms telemetry instance (pressure, depth, temp, 3-axis accel, turbidity, battery) for scientific calibration and mobile BLE verification.

#Seq	Depth (m)	Pressure	Accel (X/Y/Z)	Turbidity	Event
Waiting for telemetry stream ticks...